HTE10-14
HTE10-14 Twin Bootlace Ferrule: 2×10 mm² / 8 AWG Brown, 14 mm Pin
The HTE10-14 twin wire ferrule is an insulated bootlace ferrule that terminates two 10 mm² stranded conductors in one barrel, so a single crimp enters the terminal.
- Wire size2×10 mm² / catalogue reference 8 AWG
- Pin length14 mm / 0.55 in
- CollarBrown, DIN colour configuration
- Rating70 A catalogue maximum
- ComplianceCE and RoHS; not UL Listed
- Pack500 pieces
HTE10-14 wire ferrule dimensions and specifications
| Property | HTE10-14 value |
|---|---|
| Product type | Twin insulated ferrule / twin bootlace ferrule |
| Conductor cross-section | 2×10 mm² |
| Catalogue AWG reference | 8 AWG |
| Pin / barrel length (F) | 14.0 mm / 0.55 in |
| Overall length (L) | 26.6 mm / 1.05 in |
| Collar width (W) | 12.6 mm / 0.50 in |
| Collar height (H) | 12.6 mm / 0.50 in |
| Barrel outside diameter (D) | 6.9 mm / 0.27 in |
| Barrel inside diameter (C) | 6.5 mm / 0.26 in |
| Collar colour shown | Brown |
| Alternative factory colours | Red or White; confirm when ordering |
| Barrel material | Copper, tin plated |
| Collar material | PA66 nylon, halogen-free |
| Maximum operating temperature | 105 °C |
| Catalogue current rating | 70 A |
| Compliance | CE and RoHS; not UL Listed |
| Pack quantity | 500 pcs |
The AWG value is the supplier catalogue reference, not a mathematical conversion. Select HTE10-14 from the conductor’s marked 2×10 mm² cross-section first, then compare a 14 mm pin with the terminal maker’s accepted ferrule and strip-length requirements.
2×10 mm² brown ferrule with a 14 mm pin
The model code is direct: 10 identifies the 10 mm² conductor size and 14 identifies the nominal pin length in millimetres. HTE10-14 suits terminals that accept a 14 mm pin.
Compliance and ordering
HTE10-14 is not UL Listed. The UL 486F listing covers the HE insulated single-wire series only, and the twin range is outside it. HTE10-14 is supplied with CE and RoHS documentation. If the panel requires a UL Listed ferrule, specify the equivalent HE series instead.
Request HTE10-14 pricing
Send the required quantity and destination. Termnex will confirm current availability, lead time and the documentation supplied with the quoted pack.
FAQ
What does HTE10-14 mean?
HTE identifies the insulated twin ferrule series, which terminates two conductors in one barrel. The 10 size code identifies the 10 mm² size of each conductor and 14 denotes a 14 mm pin.
Why use a twin ferrule instead of two single ferrules?
A twin ferrule brings two conductors into one terminal in a single crimp. Forcing two separate ferrules into one terminal risks an uneven clamp.
Is HTE10-14 UL Listed?
No. The supplier confirms UL 486F covers the HE single-wire series only; the HTE twin series is not UL Listed. It is supplied with CE and RoHS documentation.
Is HTE10-14 a bootlace ferrule?
Yes. Wire ferrule, bootlace ferrule, cable ferrule and cord end terminal are common names for this type of stranded-wire termination.
Which crimp tool covers HTE10-14?
HX-35WF covers the 10 mm² range that includes HTE10-14. Verify the finished crimp against the conductor and terminal requirements.
Is HTE10-14 sold individually?
No. The standard factory pack contains 500 pieces. Small evaluation quantities and commercial terms are confirmed with the quotation.
Related ferrules