HE10-12
HE10-12 Insulated Bootlace Ferrule: 10 mm² / 8 AWG Brown, 12 mm Pin
The HE10-12 is a brown 10 mm insulated bootlace ferrule, also listed as a wire ferrule or cord end terminal, for terminating 10 mm² / 8 AWG stranded conductor before it enters a screw or spring terminal.
- Wire size10 mm² / catalogue reference 8 AWG
- Pin length12 mm / 0.47 in
- CollarBrown as shown; DIN 47002 assigns Red at 10 mm²
- Rating70 A catalogue maximum
- ComplianceCE and RoHS; not UL Listed
- Pack500 pieces
HE10-12 wire ferrule dimensions and specifications
| Property | HE10-12 value |
|---|---|
| Product type | Single-wire insulated ferrule / bootlace ferrule |
| Conductor cross-section | 10 mm² |
| Catalogue AWG reference | 8 AWG |
| Pin / barrel length (F) | 12.0 mm / 0.47 in |
| Overall length (L) | 20.8 mm / 0.82 in |
| Collar width (W) | 7.5 mm / 0.30 in |
| Collar height (H) | 9.0 mm / 0.35 in |
| Barrel outside diameter (D) | 4.9 mm / 0.19 in |
| Barrel inside diameter (C) | 4.5 mm / 0.18 in |
| Collar colour shown | Brown |
| Alternative factory colours | White or Red; confirm when ordering |
| Barrel material | Copper, tin plated |
| Collar material | PA66 nylon, halogen-free |
| Maximum operating temperature | 105 °C |
| Catalogue current rating | 70 A |
| Compliance | CE and RoHS; not UL Listed |
| Pack quantity | 500 pcs |
The AWG value is the supplier catalogue reference, not a mathematical conversion. Use the wire ferrule size and colour guide when comparing catalogue labels. Select HE10-12 from the conductor’s marked 10 mm² cross-section first, then compare a 12 mm pin with the terminal maker’s accepted ferrule and strip-length requirements.
10 mm brown bootlace ferrule, 10 mm² / 8 AWG, with a 12 mm pin
The model code is direct: 10 identifies the 10 mm² conductor size and 12 identifies the nominal pin length in millimetres. HE10-12 suits terminals that accept a 12 mm pin. Compare every pin length and series at this cross-section on the 10 mm² bootlace ferrule page. Small quantities of the 10 mm² size are also included in the Termnex wire ferrule kits.
Compliance and ordering
HE10-12 is not UL Listed. The HE series has model-specific UL 486F coverage, and this exact model is outside the current covered-model list. HE10-12 is supplied with CE and RoHS documentation; confirm the required compliance documents with the quotation.
Request HE10-12 pricing
Send the required quantity and destination. Termnex will confirm current availability, lead time and the documentation supplied with the quoted pack.
FAQ
What does HE10-12 mean?
HE identifies the insulated single-wire ferrule series. The 10 size code identifies the 10 mm² conductor size and 12 denotes a 12 mm nominal pin length.
Is brown the only HE10-12 collar colour?
No. The shown Termnex configuration is brown. Factory data also lists white or red, so specify the required colour with the order.
Is HE10-12 UL Listed?
No. HE10-12 is outside the current UL 486F covered-model list. The HE series has model-specific coverage, so do not extend the listing from a neighbouring size.
Is HE10-12 a bootlace ferrule?
Yes. Wire ferrule, bootlace ferrule, cable ferrule and cord end terminal are common names for this type of stranded-wire termination.
Which crimp tool covers HE10-12?
HX-35WF covers the 10 mm² range that includes HE10-12. Verify the finished crimp against the conductor and terminal requirements.
Is HE10-12 sold individually?
No. The standard factory pack contains 500 pieces. Small evaluation quantities and commercial terms are confirmed with the quotation.
Related ferrules