Ferrule selection
Wire Ferrule Selector
Narrow the Termnex catalogue to the ferrules that match your conductor, then take the remaining dimensions to the terminal manufacturer. Cross-section fixes the nominal size; the terminal decides the rest.
Covers 145 catalogued models: HE insulated single 0.3 – 150 mm², HTE twin 2 × 0.5 – 2 × 16 mm² and HEN non-insulated 0.3 – 185 mm². Dimensions and colours are Termnex catalogue values; DIN 46228-4 and DIN 47002 references are labelled separately where the standard applies.
Select
Start with the conductor going into the terminal
Certification
Twin ferrules require two conductors of the same cross-section. Enter that one size above.
Quote a part number, or send the shortlist and the terminal requirement together.
Request pricingBefore ordering, confirm three things with the terminal manufacturer and your tooling: that the terminal accepts a ferrule at this cross-section, the pin length its connection data requires, and that your crimping tool covers the part. The pin length guide and the crimping guide cover both checks.
Terminal entry
A twin ferrule is much wider across the collar
Same per-conductor cross-section, nearly double the collar width. This is a practical clearance check at the terminal face.
HE1508 · single, 1.5 mm²3.5 mmCollar width
HTE1508 · twin, 2 × 1.5 mm²6.6 mmCollar width
Difference+3.1 mm89% wider at the same cross-section
Compare collar width with the available clearance at the terminal face. It is not a fit test: an entry opening says nothing about the clamping geometry behind it, so the terminal manufacturer confirms whether the part is accepted. On single insulated sizes up to 50 mm² this width also appears as DIN 46228-4 d₂; on twin parts the collar is not round, so width is the governing figure rather than a diameter.
Full catalogue
Every catalogued model
The complete table stays available without JavaScript. It is collapsed so the selector above keeps the page short.
Show all 145 catalogued models
| Model | Type | Cross-section | Pin length | Overall length | Collar width | Barrel OD / ID | Available colours | Pack | Catalogue current | UL 486F |
|---|---|---|---|---|---|---|---|---|---|---|
| HE0306 | Insulated single AWG 24 | 0.3 mm² | 6 mm | 10.4 mm | 1.9 mm | 1.1 / 0.8 mm | Red · Blue Catalogue colour; below the DIN colour range | 1000 pcs | 7 A | — |
| HE0308 | Insulated single AWG 24 | 0.3 mm² | 8 mm | 12.4 mm | 1.9 mm | 1.1 / 0.8 mm | Red · Blue Catalogue colour; below the DIN colour range | 1000 pcs | 7 A | — |
| HE0506 | Insulated single AWG 22 | 0.5 mm² | 6 mm | 12 mm | 2.6 mm | 1.3 / 1 mm | Orange · White DIN reference: White | 1000 pcs | 9 A | Listed |
| HE0508 | Insulated single AWG 22 | 0.5 mm² | 8 mm | 14 mm | 2.6 mm | 1.3 / 1 mm | Orange · White DIN reference: White | 1000 pcs | 9 A | Listed |
| HE0510 | Insulated single AWG 22 | 0.5 mm² | 10 mm | 16 mm | 2.6 mm | 1.3 / 1 mm | Orange · White DIN reference: White | 1000 pcs | 9 A | Listed |
| HE0512 | Insulated single AWG 22 | 0.5 mm² | 12 mm | 18 mm | 2.6 mm | 1.3 / 1 mm | Orange · White DIN reference: White | 1000 pcs | 9 A | Listed |
| HE7506 | Insulated single AWG 20 | 0.75 mm² | 6 mm | 12.3 mm | 2.8 mm | 1.5 / 1.2 mm | White · Blue · Grey DIN reference: Grey | 1000 pcs | 12 A | Listed |
| HE7508 | Insulated single AWG 20 | 0.75 mm² | 8 mm | 14.3 mm | 2.8 mm | 1.5 / 1.2 mm | White · Blue · Grey DIN reference: Grey | 1000 pcs | 12 A | Listed |
| HE7510 | Insulated single AWG 20 | 0.75 mm² | 10 mm | 16.3 mm | 2.8 mm | 1.5 / 1.2 mm | White · Blue · Grey DIN reference: Grey | 1000 pcs | 12 A | Listed |
| HE7512 | Insulated single AWG 20 | 0.75 mm² | 12 mm | 18.3 mm | 2.8 mm | 1.5 / 1.2 mm | White · Blue · Grey DIN reference: Grey | 1000 pcs | 12 A | Listed |
| HE7518 | Insulated single AWG 20 | 0.75 mm² | 18 mm | 24.3 mm | 2.8 mm | 1.5 / 1.2 mm | White · Blue · Grey DIN reference: Grey | 1000 pcs | 12 A | Listed |
| HE1006 | Insulated single AWG 18 | 1 mm² | 6 mm | 12.3 mm | 3 mm | 1.8 / 1.4 mm | Yellow · Red DIN reference: Red | 1000 pcs | 17 A | Listed |
| HE1008 | Insulated single AWG 18 | 1 mm² | 8 mm | 14.5 mm | 3 mm | 1.8 / 1.4 mm | Yellow · Red DIN reference: Red | 1000 pcs | 17 A | Listed |
| HE1010 | Insulated single AWG 18 | 1 mm² | 10 mm | 16.3 mm | 3 mm | 1.8 / 1.4 mm | Yellow · Red DIN reference: Red | 1000 pcs | 17 A | Listed |
| HE1012 | Insulated single AWG 18 | 1 mm² | 12 mm | 18.3 mm | 3 mm | 1.8 / 1.4 mm | Yellow · Red DIN reference: Red | 1000 pcs | 17 A | Listed |
| HE1018 | Insulated single AWG 18 | 1 mm² | 18 mm | 24.3 mm | 3 mm | 1.8 / 1.4 mm | Yellow · Red DIN reference: Red | 1000 pcs | 17 A | Listed |
| HE1506 | Insulated single AWG 16 | 1.5 mm² | 6 mm | 12.3 mm | 3.5 mm | 2 / 1.7 mm | Red · Black DIN reference: Black | 1000 pcs | 18 A | — |
| HE1508 | Insulated single AWG 16 | 1.5 mm² | 8 mm | 14.5 mm | 3.5 mm | 2 / 1.7 mm | Red · Black DIN reference: Black | 1000 pcs | 18 A | Listed |
| HE1510 | Insulated single AWG 16 | 1.5 mm² | 10 mm | 16.5 mm | 3.5 mm | 2 / 1.7 mm | Red · Black DIN reference: Black | 1000 pcs | 18 A | Listed |
| HE1512 | Insulated single AWG 16 | 1.5 mm² | 12 mm | 18.5 mm | 3.5 mm | 2 / 1.7 mm | Red · Black DIN reference: Black | 1000 pcs | 18 A | Listed |
| HE1515 | Insulated single AWG 16 | 1.5 mm² | 15 mm | 21.5 mm | 3.5 mm | 2 / 1.7 mm | Red · Black DIN reference: Black | 1000 pcs | 18 A | Listed |
| HE1518 | Insulated single AWG 16 | 1.5 mm² | 18 mm | 24.5 mm | 3.5 mm | 2 / 1.7 mm | Red · Black DIN reference: Black | 1000 pcs | 18 A | Listed |
| HE2508 | Insulated single AWG 14 | 2.5 mm² | 8 mm | 15.4 mm | 4 mm | 2.6 / 2.3 mm | Blue · Gray DIN reference: Blue | 1000 pcs | 30 A | Listed |
| HE2510 | Insulated single AWG 14 | 2.5 mm² | 10 mm | 17.4 mm | 4 mm | 2.6 / 2.3 mm | Blue · Gray DIN reference: Blue | 1000 pcs | 30 A | Listed |
| HE2512 | Insulated single AWG 14 | 2.5 mm² | 12 mm | 19.4 mm | 4 mm | 2.6 / 2.3 mm | Blue · Gray DIN reference: Blue | 1000 pcs | 30 A | Listed |
| HE2518 | Insulated single AWG 14 | 2.5 mm² | 18 mm | 25.4 mm | 4 mm | 2.6 / 2.3 mm | Blue · Gray DIN reference: Blue | 1000 pcs | 30 A | Listed |
| HE4009 | Insulated single AWG 12 | 4 mm² | 9 mm | 16.4 mm | 4.8 mm | 3.2 / 2.8 mm | Gray · Orange DIN reference: Grey | 1000 pcs | 35 A | Listed |
| HE4010 | Insulated single AWG 12 | 4 mm² | 10 mm | 17.4 mm | 4.8 mm | 3.2 / 2.8 mm | Gray · Orange DIN reference: Grey | 1000 pcs | 35 A | Listed |
| HE4012 | Insulated single AWG 12 | 4 mm² | 12 mm | 19.4 mm | 4.8 mm | 3.2 / 2.8 mm | Gray · Orange DIN reference: Grey | 1000 pcs | 35 A | Listed |
| HE4015 | Insulated single AWG 12 | 4 mm² | 15 mm | 22.4 mm | 4.8 mm | 3.2 / 2.8 mm | Gray · Orange DIN reference: Grey | 1000 pcs | 35 A | — |
| HE4018 | Insulated single AWG 12 | 4 mm² | 18 mm | 25.4 mm | 4.8 mm | 3.2 / 2.8 mm | Gray · Orange DIN reference: Grey | 1000 pcs | 35 A | Listed |
| HE6010 | Insulated single AWG 10 | 6 mm² | 10 mm | 18.5 mm | 6 mm | 3.9 / 3.5 mm | Black · Green · Yellow DIN reference: Yellow | 1000 pcs | 50 A | — |
| HE6012 | Insulated single AWG 10 | 6 mm² | 12 mm | 20.5 mm | 6 mm | 3.9 / 3.5 mm | Black · Green · Yellow DIN reference: Yellow | 1000 pcs | 50 A | Listed |
| HE6018 | Insulated single AWG 10 | 6 mm² | 18 mm | 26.5 mm | 6 mm | 3.9 / 3.5 mm | Black · Green · Yellow DIN reference: Yellow | 1000 pcs | 50 A | Listed |
| HE10-12 | Insulated single AWG 8 | 10 mm² | 12 mm | 20.8 mm | 7.5 mm | 4.9 / 4.5 mm | White · Brown · Red DIN reference: Red | 500 pcs | 70 A | — |
| HE10-18 | Insulated single AWG 8 | 10 mm² | 18 mm | 26.8 mm | 7.5 mm | 4.9 / 4.5 mm | White · Brown · Red DIN reference: Red | 500 pcs | 70 A | — |
| HE16-12 | Insulated single AWG 6 | 16 mm² | 12 mm | 22 mm | 8.7 mm | 6.2 / 5.8 mm | Green · White · Blue DIN reference: Blue | 500 pcs | 95 A | — |
| HE16-18 | Insulated single AWG 6 | 16 mm² | 18 mm | 28 mm | 8.7 mm | 6.2 / 5.8 mm | Green · White · Blue DIN reference: Blue | 500 pcs | 95 A | — |
| HE16-35 | Insulated single AWG 6 | 16 mm² | 35 mm | 45 mm | 8.7 mm | 6.2 / 5.8 mm | Green · White · Blue DIN reference: Blue | 500 pcs | 95 A | — |
| HE25-12 | Insulated single AWG 4 | 25 mm² | 12 mm | 24 mm | 11 mm | 7.9 / 7.5 mm | Brown · Black · Yellow DIN reference: Yellow | 250 pcs | 125 A | — |
| HE25-16 | Insulated single AWG 4 | 25 mm² | 16 mm | 28 mm | 11 mm | 7.9 / 7.5 mm | Brown · Black · Yellow DIN reference: Yellow | 250 pcs | 125 A | — |
| HE25-18 | Insulated single AWG 4 | 25 mm² | 18 mm | 30 mm | 11 mm | 7.9 / 7.5 mm | Brown · Black · Yellow DIN reference: Yellow | 250 pcs | 125 A | — |
| HE25-22 | Insulated single AWG 4 | 25 mm² | 22 mm | 34 mm | 11 mm | 7.9 / 7.5 mm | Brown · Black · Yellow DIN reference: Yellow | 250 pcs | 125 A | — |
| HE35-16 | Insulated single AWG 2 | 35 mm² | 16 mm | 30 mm | 12.5 mm | 8.7 / 8.3 mm | Gray · Red DIN reference: Red | 200 pcs | 170 A | — |
| HE35-18 | Insulated single AWG 2 | 35 mm² | 18 mm | 32 mm | 12.5 mm | 8.7 / 8.3 mm | Gray · Red DIN reference: Red | 200 pcs | 170 A | — |
| HE35-22 | Insulated single AWG 2 | 35 mm² | 22 mm | 36 mm | 12.5 mm | 8.7 / 8.3 mm | Gray · Red DIN reference: Red | 200 pcs | 170 A | — |
| HE35-25 | Insulated single AWG 2 | 35 mm² | 25 mm | 39 mm | 12.5 mm | 8.7 / 8.3 mm | Gray · Red DIN reference: Red | 200 pcs | 170 A | — |
| HE50-12 | Insulated single AWG 1/0 | 50 mm² | 12 mm | 28 mm | 15 mm | 10.9 / 10.3 mm | Blue · Green DIN reference: Blue | 100 pcs | 230 A | — |
| HE50-20 | Insulated single AWG 1/0 | 50 mm² | 20 mm | 36 mm | 15 mm | 10.9 / 10.3 mm | Blue · Green DIN reference: Blue | 100 pcs | 230 A | — |
| HE50-25 | Insulated single AWG 1/0 | 50 mm² | 25 mm | 41 mm | 15 mm | 10.9 / 10.3 mm | Blue · Green DIN reference: Blue | 100 pcs | 230 A | — |
| HE70-20 | Insulated single AWG 2/0 | 70 mm² | 20 mm | 37 mm | 16 mm | 14.3 / 13.5 mm | Yellow Catalogue colour; no DIN colour standard above 50 mm² | 50 pcs | 265 A | — |
| HE70-25 | Insulated single AWG 2/0 | 70 mm² | 25 mm | 42 mm | 16 mm | 14.3 / 13.5 mm | Yellow Catalogue colour; no DIN colour standard above 50 mm² | 50 pcs | 265 A | — |
| HE95-25 | Insulated single AWG 3/0 | 95 mm² | 25 mm | 44 mm | 18.5 mm | 15.6 / 14.8 mm | Red Catalogue colour; no DIN colour standard above 50 mm² | 50 pcs | 310 A | — |
| HE120-27 | Insulated single AWG 4/0 | 120 mm² | 27 mm | 47.6 mm | 20.3 mm | 17.7 / 16.7 mm | Blue Catalogue colour; no DIN colour standard above 50 mm² | 50 pcs | 360 A | — |
| HE120-32 | Insulated single AWG 4/0 | 120 mm² | 32 mm | 52.6 mm | 20.3 mm | 17.7 / 16.7 mm | Blue Catalogue colour; no DIN colour standard above 50 mm² | 50 pcs | 360 A | — |
| HE150-25 | Insulated single AWG 250/300MCM | 150 mm² | 25 mm | 50.6 mm | 23.4 mm | 20.6 / 19.6 mm | Yellow Catalogue colour; no DIN colour standard above 50 mm² | 25 pcs | 405 A | — |
| HE150-27 | Insulated single AWG 250/300MCM | 150 mm² | 27 mm | 52.6 mm | 23.4 mm | 20.6 / 19.6 mm | Yellow Catalogue colour; no DIN colour standard above 50 mm² | 25 pcs | 405 A | — |
| HE150-32 | Insulated single AWG 250/300MCM | 150 mm² | 32 mm | 57.6 mm | 23.4 mm | 20.6 / 19.6 mm | Yellow Catalogue colour; no DIN colour standard above 50 mm² | 25 pcs | 405 A | — |
| HEN0306 | Non-insulated AWG 24 | 0.3 mm² | 6 mm | 6 mm same as pin — no collar | 1.5 mm tube width — no collar | 1.1 / 0.8 mm | No insulation collar | 2000 pcs | 7 A | — |
| HEN0308 | Non-insulated AWG 24 | 0.3 mm² | 8 mm | 8 mm same as pin — no collar | 1.5 mm tube width — no collar | 1.1 / 0.8 mm | No insulation collar | 2000 pcs | 7 A | — |
| HEN0506 | Non-insulated AWG 22 | 0.5 mm² | 6 mm | 6 mm same as pin — no collar | 1.7 mm tube width — no collar | 1.3 / 1 mm | No insulation collar | 2000 pcs | 9 A | — |
| HEN0508 | Non-insulated AWG 22 | 0.5 mm² | 8 mm | 8 mm same as pin — no collar | 1.7 mm tube width — no collar | 1.3 / 1 mm | No insulation collar | 2000 pcs | 9 A | — |
| HEN0510 | Non-insulated AWG 22 | 0.5 mm² | 10 mm | 10 mm same as pin — no collar | 1.7 mm tube width — no collar | 1.3 / 1 mm | No insulation collar | 2000 pcs | 9 A | — |
| HEN0512 | Non-insulated AWG 22 | 0.5 mm² | 12 mm | 12 mm same as pin — no collar | 1.7 mm tube width — no collar | 1.3 / 1 mm | No insulation collar | 2000 pcs | 9 A | — |
| HEN7506 | Non-insulated AWG 20 | 0.75 mm² | 6 mm | 6 mm same as pin — no collar | 1.9 mm tube width — no collar | 1.5 / 1.2 mm | No insulation collar | 2000 pcs | 12 A | — |
| HEN7508 | Non-insulated AWG 20 | 0.75 mm² | 8 mm | 8 mm same as pin — no collar | 1.9 mm tube width — no collar | 1.5 / 1.2 mm | No insulation collar | 2000 pcs | 12 A | — |
| HEN7510 | Non-insulated AWG 20 | 0.75 mm² | 10 mm | 10 mm same as pin — no collar | 1.9 mm tube width — no collar | 1.5 / 1.2 mm | No insulation collar | 2000 pcs | 12 A | — |
| HEN7512 | Non-insulated AWG 20 | 0.75 mm² | 12 mm | 12 mm same as pin — no collar | 1.9 mm tube width — no collar | 1.5 / 1.2 mm | No insulation collar | 2000 pcs | 12 A | — |
| HEN1006 | Non-insulated AWG 18 | 1 mm² | 6 mm | 6 mm same as pin — no collar | 2.2 mm tube width — no collar | 1.8 / 1.4 mm | No insulation collar | 2000 pcs | 17 A | — |
| HEN1008 | Non-insulated AWG 18 | 1 mm² | 8 mm | 8 mm same as pin — no collar | 2.2 mm tube width — no collar | 1.8 / 1.4 mm | No insulation collar | 2000 pcs | 17 A | — |
| HEN1010 | Non-insulated AWG 18 | 1 mm² | 10 mm | 10 mm same as pin — no collar | 2.2 mm tube width — no collar | 1.8 / 1.4 mm | No insulation collar | 2000 pcs | 17 A | — |
| HEN1012 | Non-insulated AWG 18 | 1 mm² | 12 mm | 12 mm same as pin — no collar | 2.2 mm tube width — no collar | 1.8 / 1.4 mm | No insulation collar | 2000 pcs | 17 A | — |
| HEN1018 | Non-insulated AWG 18 | 1 mm² | 18 mm | 18 mm same as pin — no collar | 2.2 mm tube width — no collar | 1.8 / 1.4 mm | No insulation collar | 2000 pcs | 17 A | — |
| HEN1508 | Non-insulated AWG 16 | 1.5 mm² | 8 mm | 8 mm same as pin — no collar | 2.5 mm tube width — no collar | 2 / 1.7 mm | No insulation collar | 2000 pcs | 18 A | — |
| HEN1510 | Non-insulated AWG 16 | 1.5 mm² | 10 mm | 10 mm same as pin — no collar | 2.5 mm tube width — no collar | 2 / 1.7 mm | No insulation collar | 2000 pcs | 18 A | — |
| HEN1512 | Non-insulated AWG 16 | 1.5 mm² | 12 mm | 12 mm same as pin — no collar | 2.5 mm tube width — no collar | 2 / 1.7 mm | No insulation collar | 2000 pcs | 18 A | — |
| HEN1518 | Non-insulated AWG 16 | 1.5 mm² | 18 mm | 18 mm same as pin — no collar | 2.5 mm tube width — no collar | 2 / 1.7 mm | No insulation collar | 2000 pcs | 18 A | — |
| HEN2506 | Non-insulated AWG 14 | 2.5 mm² | 6 mm | 6 mm same as pin — no collar | 3.3 mm tube width — no collar | 2.6 / 2.3 mm | No insulation collar | 2000 pcs | 30 A | — |
| HEN2508 | Non-insulated AWG 14 | 2.5 mm² | 8 mm | 8 mm same as pin — no collar | 3.3 mm tube width — no collar | 2.6 / 2.3 mm | No insulation collar | 2000 pcs | 30 A | — |
| HEN2510 | Non-insulated AWG 14 | 2.5 mm² | 10 mm | 10 mm same as pin — no collar | 3.3 mm tube width — no collar | 2.6 / 2.3 mm | No insulation collar | 2000 pcs | 30 A | — |
| HEN2512 | Non-insulated AWG 14 | 2.5 mm² | 12 mm | 12 mm same as pin — no collar | 3.3 mm tube width — no collar | 2.6 / 2.3 mm | No insulation collar | 2000 pcs | 30 A | — |
| HEN2518 | Non-insulated AWG 14 | 2.5 mm² | 18 mm | 18 mm same as pin — no collar | 3.3 mm tube width — no collar | 2.6 / 2.3 mm | No insulation collar | 1000 pcs | 30 A | — |
| HEN4009 | Non-insulated AWG 12 | 4 mm² | 9 mm | 9 mm same as pin — no collar | 3.9 mm tube width — no collar | 3.2 / 2.8 mm | No insulation collar | 1000 pcs | 35 A | — |
| HEN4012 | Non-insulated AWG 12 | 4 mm² | 12 mm | 12 mm same as pin — no collar | 3.9 mm tube width — no collar | 3.2 / 2.8 mm | No insulation collar | 1000 pcs | 35 A | — |
| HEN4018 | Non-insulated AWG 12 | 4 mm² | 18 mm | 18 mm same as pin — no collar | 3.9 mm tube width — no collar | 3.2 / 2.8 mm | No insulation collar | 1000 pcs | 35 A | — |
| HEN6010 | Non-insulated AWG 10 | 6 mm² | 10 mm | 10 mm same as pin — no collar | 4.7 mm tube width — no collar | 3.9 / 3.5 mm | No insulation collar | 1000 pcs | 50 A | — |
| HEN6012 | Non-insulated AWG 10 | 6 mm² | 12 mm | 12 mm same as pin — no collar | 4.7 mm tube width — no collar | 3.9 / 3.5 mm | No insulation collar | 1000 pcs | 50 A | — |
| HEN6015 | Non-insulated AWG 10 | 6 mm² | 15 mm | 15 mm same as pin — no collar | 4.7 mm tube width — no collar | 3.9 / 3.5 mm | No insulation collar | 1000 pcs | 50 A | — |
| HEN6018 | Non-insulated AWG 10 | 6 mm² | 18 mm | 18 mm same as pin — no collar | 4.7 mm tube width — no collar | 3.9 / 3.5 mm | No insulation collar | 1000 pcs | 50 A | — |
| HEN10-10 | Non-insulated AWG 8 | 10 mm² | 10 mm | 10 mm same as pin — no collar | 5.8 mm tube width — no collar | 4.9 / 4.5 mm | No insulation collar | 1000 pcs | 70 A | — |
| HEN10-12 | Non-insulated AWG 8 | 10 mm² | 12 mm | 12 mm same as pin — no collar | 5.8 mm tube width — no collar | 4.9 / 4.5 mm | No insulation collar | 1000 pcs | 70 A | — |
| HEN10-15 | Non-insulated AWG 8 | 10 mm² | 15 mm | 15 mm same as pin — no collar | 5.8 mm tube width — no collar | 4.9 / 4.5 mm | No insulation collar | 1000 pcs | 70 A | — |
| HEN10-18 | Non-insulated AWG 8 | 10 mm² | 18 mm | 18 mm same as pin — no collar | 5.8 mm tube width — no collar | 4.9 / 4.5 mm | No insulation collar | 1000 pcs | 70 A | — |
| HEN10-20 | Non-insulated AWG 8 | 10 mm² | 20 mm | 20 mm same as pin — no collar | 5.8 mm tube width — no collar | 4.9 / 4.5 mm | No insulation collar | 1000 pcs | 70 A | — |
| HEN10-25 | Non-insulated AWG 8 | 10 mm² | 25 mm | 25 mm same as pin — no collar | 5.8 mm tube width — no collar | 4.9 / 4.5 mm | No insulation collar | 1000 pcs | 70 A | — |
| HEN16-12 | Non-insulated AWG 6 | 16 mm² | 12 mm | 12 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 1000 pcs | 95 A | — |
| HEN16-15 | Non-insulated AWG 6 | 16 mm² | 15 mm | 15 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 1000 pcs | 95 A | — |
| HEN16-18 | Non-insulated AWG 6 | 16 mm² | 18 mm | 18 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 1000 pcs | 95 A | — |
| HEN16-20 | Non-insulated AWG 6 | 16 mm² | 20 mm | 20 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 1000 pcs | 95 A | — |
| HEN16-22 | Non-insulated AWG 6 | 16 mm² | 22 mm | 22 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 500 pcs | 95 A | — |
| HEN16-25 | Non-insulated AWG 6 | 16 mm² | 25 mm | 25 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 500 pcs | 95 A | — |
| HEN16-38 | Non-insulated AWG 6 | 16 mm² | 38 mm | 38 mm same as pin — no collar | 7.2 mm tube width — no collar | 6.2 / 5.8 mm | No insulation collar | 500 pcs | 95 A | — |
| HEN25-12 | Non-insulated AWG 4 | 25 mm² | 12 mm | 12 mm same as pin — no collar | 9.1 mm tube width — no collar | 7.9 / 7.5 mm | No insulation collar | 500 pcs | 125 A | — |
| HEN25-16 | Non-insulated AWG 4 | 25 mm² | 16 mm | 16 mm same as pin — no collar | 9.1 mm tube width — no collar | 7.9 / 7.5 mm | No insulation collar | 500 pcs | 125 A | — |
| HEN25-18 | Non-insulated AWG 4 | 25 mm² | 18 mm | 18 mm same as pin — no collar | 9.1 mm tube width — no collar | 7.9 / 7.5 mm | No insulation collar | 500 pcs | 125 A | — |
| HEN25-22 | Non-insulated AWG 4 | 25 mm² | 22 mm | 22 mm same as pin — no collar | 9.1 mm tube width — no collar | 7.9 / 7.5 mm | No insulation collar | 500 pcs | 125 A | — |
| HEN25-25 | Non-insulated AWG 4 | 25 mm² | 25 mm | 25 mm same as pin — no collar | 9.1 mm tube width — no collar | 7.9 / 7.5 mm | No insulation collar | 500 pcs | 125 A | — |
| HEN35-16 | Non-insulated AWG 2 | 35 mm² | 16 mm | 16 mm same as pin — no collar | 10.2 mm tube width — no collar | 8.7 / 8.3 mm | No insulation collar | 500 pcs | 170 A | — |
| HEN35-18 | Non-insulated AWG 2 | 35 mm² | 18 mm | 18 mm same as pin — no collar | 10.2 mm tube width — no collar | 8.7 / 8.3 mm | No insulation collar | 500 pcs | 170 A | — |
| HEN35-20 | Non-insulated AWG 2 | 35 mm² | 20 mm | 20 mm same as pin — no collar | 10.2 mm tube width — no collar | 8.7 / 8.3 mm | No insulation collar | 500 pcs | 170 A | — |
| HEN35-25 | Non-insulated AWG 2 | 35 mm² | 25 mm | 25 mm same as pin — no collar | 10.2 mm tube width — no collar | 8.7 / 8.3 mm | No insulation collar | 500 pcs | 170 A | — |
| HEN50-12 | Non-insulated AWG 1/0 | 50 mm² | 12 mm | 12 mm same as pin — no collar | 12.7 mm tube width — no collar | 10.9 / 10.3 mm | No insulation collar | 500 pcs | 230 A | — |
| HEN50-18 | Non-insulated AWG 1/0 | 50 mm² | 18 mm | 18 mm same as pin — no collar | 12.7 mm tube width — no collar | 10.9 / 10.3 mm | No insulation collar | 200 pcs | 230 A | — |
| HEN50-20 | Non-insulated AWG 1/0 | 50 mm² | 20 mm | 20 mm same as pin — no collar | 12.7 mm tube width — no collar | 10.9 / 10.3 mm | No insulation collar | 200 pcs | 230 A | — |
| HEN50-25 | Non-insulated AWG 1/0 | 50 mm² | 25 mm | 25 mm same as pin — no collar | 12.7 mm tube width — no collar | 10.9 / 10.3 mm | No insulation collar | 200 pcs | 230 A | — |
| HEN70-22 | Non-insulated AWG 2/0 | 70 mm² | 22 mm | 22 mm same as pin — no collar | 15.8 mm tube width — no collar | 14.3 / 13.5 mm | No insulation collar | 100 pcs | 265 A | — |
| HEN70-25 | Non-insulated AWG 2/0 | 70 mm² | 25 mm | 25 mm same as pin — no collar | 15.8 mm tube width — no collar | 14.3 / 13.5 mm | No insulation collar | 100 pcs | 265 A | — |
| HEN70-32 | Non-insulated AWG 2/0 | 70 mm² | 32 mm | 32 mm same as pin — no collar | 15.8 mm tube width — no collar | 14.3 / 13.5 mm | No insulation collar | 100 pcs | 265 A | — |
| HEN95-25 | Non-insulated AWG 3/0 | 95 mm² | 25 mm | 25 mm same as pin — no collar | 17.3 mm tube width — no collar | 15.6 / 14.8 mm | No insulation collar | 100 pcs | 310 A | — |
| HEN95-30 | Non-insulated AWG 3/0 | 95 mm² | 30 mm | 30 mm same as pin — no collar | 17.3 mm tube width — no collar | 15.6 / 14.8 mm | No insulation collar | 100 pcs | 310 A | — |
| HEN95-34 | Non-insulated AWG 3/0 | 95 mm² | 34 mm | 34 mm same as pin — no collar | 17.3 mm tube width — no collar | 15.6 / 14.8 mm | No insulation collar | 100 pcs | 310 A | — |
| HEN120-30 | Non-insulated AWG 4/0 | 120 mm² | 30 mm | 30 mm same as pin — no collar | 20.2 mm tube width — no collar | 17.7 / 16.7 mm | No insulation collar | 100 pcs | 360 A | — |
| HEN120-34 | Non-insulated AWG 4/0 | 120 mm² | 34 mm | 34 mm same as pin — no collar | 20.2 mm tube width — no collar | 17.7 / 16.7 mm | No insulation collar | 100 pcs | 360 A | — |
| HEN120-38 | Non-insulated AWG 4/0 | 120 mm² | 38 mm | 38 mm same as pin — no collar | 20.2 mm tube width — no collar | 17.7 / 16.7 mm | No insulation collar | 100 pcs | 360 A | — |
| HEN150-32 | Non-insulated AWG 250/300MCM | 150 mm² | 32 mm | 32 mm same as pin — no collar | 23 mm tube width — no collar | 20.6 / 19.6 mm | No insulation collar | 50 pcs | 405 A | — |
| HEN150-40 | Non-insulated AWG 250/300MCM | 150 mm² | 40 mm | 40 mm same as pin — no collar | 23 mm tube width — no collar | 20.6 / 19.6 mm | No insulation collar | 50 pcs | 405 A | — |
| HEN185-32 | Non-insulated AWG 300/350MCM | 185 mm² | 32 mm | 32 mm same as pin — no collar | 23.9 mm tube width — no collar | 21.4 / 20.2 mm | No insulation collar | 50 pcs | 445 A | — |
| HTE0508 | Insulated twin 2 × AWG 22 | 2 × 0.5 mm² | 8 mm | 14.5 mm | 5 mm | 1.8 / 1.5 mm | White · Orange | 1000 pcs | 9 A | — |
| HTE0510 | Insulated twin 2 × AWG 22 | 2 × 0.5 mm² | 10 mm | 16.5 mm | 5 mm | 1.8 / 1.5 mm | White · Orange | 1000 pcs | 9 A | — |
| HTE0512 | Insulated twin 2 × AWG 22 | 2 × 0.5 mm² | 12 mm | 18.5 mm | 5 mm | 1.8 / 1.5 mm | White · Orange | 1000 pcs | 9 A | — |
| HTE7508 | Insulated twin 2 × AWG 20 | 2 × 0.75 mm² | 8 mm | 14.9 mm | 5.5 mm | 2.1 / 1.8 mm | Blue · Gray · White | 1000 pcs | 12 A | — |
| HTE7510 | Insulated twin 2 × AWG 20 | 2 × 0.75 mm² | 10 mm | 16.9 mm | 5.5 mm | 2.1 / 1.8 mm | Blue · Gray · White | 1000 pcs | 12 A | — |
| HTE7512 | Insulated twin 2 × AWG 20 | 2 × 0.75 mm² | 12 mm | 18.9 mm | 5.5 mm | 2.1 / 1.8 mm | Blue · Gray · White | 1000 pcs | 12 A | — |
| HTE1008 | Insulated twin 2 × AWG 18 | 2 × 1 mm² | 8 mm | 15.1 mm | 5.5 mm | 2.3 / 2 mm | Red · Yellow | 1000 pcs | 17 A | — |
| HTE1010 | Insulated twin 2 × AWG 18 | 2 × 1 mm² | 10 mm | 17.1 mm | 5.5 mm | 2.3 / 2 mm | Red · Yellow | 1000 pcs | 17 A | — |
| HTE1508 | Insulated twin 2 × AWG 16 | 2 × 1.5 mm² | 8 mm | 15.5 mm | 6.6 mm | 2.6 / 2.3 mm | Black · Red | 1000 pcs | 18 A | — |
| HTE1510 | Insulated twin 2 × AWG 16 | 2 × 1.5 mm² | 10 mm | 17.5 mm | 6.6 mm | 2.6 / 2.3 mm | Black · Red | 1000 pcs | 18 A | — |
| HTE1512 | Insulated twin 2 × AWG 16 | 2 × 1.5 mm² | 12 mm | 19.5 mm | 6.6 mm | 2.6 / 2.3 mm | Black · Red | 1000 pcs | 18 A | — |
| HTE2508 | Insulated twin 2 × AWG 14 | 2 × 2.5 mm² | 8 mm | 16.5 mm | 8 mm | 3.3 / 2.9 mm | Gray · Blue | 1000 pcs | 30 A | — |
| HTE2510 | Insulated twin 2 × AWG 14 | 2 × 2.5 mm² | 10 mm | 18.5 mm | 8 mm | 3.3 / 2.9 mm | Gray · Blue | 1000 pcs | 30 A | — |
| HTE2513 | Insulated twin 2 × AWG 14 | 2 × 2.5 mm² | 13 mm | 21.5 mm | 8 mm | 3.3 / 2.9 mm | Gray · Blue | 1000 pcs | 30 A | — |
| HTE4012 | Insulated twin 2 × AWG 12 | 2 × 4 mm² | 12 mm | 23.1 mm | 8.8 mm | 4.2 / 3.8 mm | Orange · Gray | 1000 pcs | 35 A | — |
| HTE6014 | Insulated twin 2 × AWG 10 | 2 × 6 mm² | 14 mm | 26.1 mm | 9.5 mm | 5.3 / 4.9 mm | Green · Yellow · Black | 500 pcs | 50 A | — |
| HTE10-14 | Insulated twin 2 × AWG 8 | 2 × 10 mm² | 14 mm | 26.6 mm | 12.6 mm | 6.9 / 6.5 mm | Brown · Red · White | 500 pcs | 70 A | — |
| HTE16-14 | Insulated twin 2 × AWG 6 | 2 × 16 mm² | 14 mm | 31.3 mm | 19 mm | 8.7 / 8.3 mm | White · Blue · Green | 200 pcs | 95 A | — |
Dimensions, pack quantities, colours and current are Termnex catalogue values. UL 486F listing is assigned per part number from the certificate addendum, never per size band. Catalogue current is a catalogue label and is not a selection filter.
Next step
Check the reference, then the application
Wire ferrule size & colour chart
The DIN 46228-4 reference layer with dimensions, tolerances and standard colours.
Open the chart →Choosing pin length
Why the terminal decides the length and the conductor does not.
Read the guide →When to use twin ferrules
Terminal and circuit constraints before committing a design to twin parts.
Read the guide →Insulated wire ferrules
The HE single-conductor range and its model table.
View products →Twin wire ferrules
The HTE range for two conductors into one approved terminal point.
View products →Ferrule kits and assortments
Counted boxes across several cross-sections, with or without a crimping tool.
View kits →Send the shortlist
Quote the part numbers this selector returned, the quantity and the destination market, and suitable models plus the documents that market needs are confirmed with the quotation.